Product Information Sheet - 10-4075FS-2-0.250X36 Fluorosilicone Grade (FS) solid silicone sheeting is designed for applications requiring enhanced resistance to harsh chemicals, fuels, oils, and solvents. These products make excellent gasketing materials, have extreme high and low temperature resistance, and good UV and ozone resistance. They are non-toxic and chemically inert. FS Grade products are available in a range of durometers, thicknesses, widths, surfaces finishes, and may be pigmented to a wide range of colors.

(800) 935-2940 solutions@rogerscorp.com

Product Design and Construction
Side 1: 6.35 mm Cured Overall Product Thickness: 6.35 mm Color: Blue	Side 1

Basic Physical Properties	Value	Units	Test Method
Durometer	40	Shore A Points	ASTM D2240
Tensile Strength	9324	kPa	ASTM D412
Elongation	600	%	ASTM D412
Tear Strength	37.1	N/mm	N/A
Specific Gravity	1.45	N/A	Arlon SQA-TMS-024
Width	914	mm	Arlon SQA-TMS-012

Construction	Value	Units	Test Method
Construction Designation	Construction 2	N/A	Code Definitions
Color	Blue	N/A	N/A

Extended Physical Properties	Value	Units	Test Method
Total Product Weight	9.2	kg/m2	N/A
Compression Set	24	%	N/A
Elastic Modulus @ 100%	641	kPa	ASTM D412
Elastic Modulus @ 300%	2503	kPa	ASTM D412

Heat and Flame	Value	Units	Test Method
Min. Operating Temp.	-54°	°C	N/A
Max. Operating Temp.	260°	°C	N/A
Glass Transition Temp (Tc)	0	°C	ASTM 3418

Processing and Packaging	Value	Units	Test Method
Shelf Life	120	Months	N/A
Shelf Life Storage Temp	21°	C	N/A

Compression Set: 22 hr at 175C (347F) and 25% deflection.

Available in usable widths from 36 to 75 inches.
Standard color is Blue. Available in custom colors.
Standard surface finish is matte. Available with smooth, super fine fabric, fine fabric, and heavy fabric finishes.
Specify with Talc or Talc Free.

Solid Silicone Sheet Thickness Tolerances

Includes cured and uncured solid silicone sheeting with and without reinforcement produced by calendaring. Does not include uncured, unsupported, solid silicone compound pre-formed into sheets by milling.

[1] In the case of laminated products these tolerances apply only to the individual layers and not the overall thickness of the laminate. Laminate thicknesses are nominal.

[2] Imperial or metric tolerance govern based on the measurement system of the part description.

Note: Shelf life is defined as the duration of time for which the product will meet the physical characteristics outlined on this page. It does not guarantee the product's usefulness in all applications.

Note: Bond Strength ASTM XXXX test methods:

• For Constructions 0-9, any reported bond strength is "Ply Adhesion"
• For Supported Tapes, reported bond strength is from internal method where tape is hung up, stretched, and rolled up -- the strength required to unroll is reported : ASTM D2148
• For unsupported tape, the reported value is a Government Bond where 2 pieces are bonded together and plied apart: MIL-I-46852C

The data presented in this document represents typical values for the production material. Typical values should not be used for specification limits. Material colors displayed are representations only, actual colors will vary. The information contained in this Data Sheet is intended to assist you in designing with Rogers’ Elastomeric Material Solutions. It is not intended to and does not create any warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose or that the results shown in this Data Sheet will be achieved by a user for a particular purpose. The user should determine the suitability of Rogers’ ARLON products for each application. The Rogers logo, ARLON, and the ARLON logo are trademarks of Rogers Corporation or one of its subsidiaries. © 2020 Rogers Corporation. All rights reserved. www.rogerscorp.com. Modified: 11/16/2020